FreePDK45:SaveDerived

From NCSU EDA Wiki

Revision as of 15:37, 7 February 2007 by Mdbucher (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Verification Rule Type

Design Rule Check

saveDerived rules can perform an implied check on two or more layers by creating a new layer which represents a violation of a design rule. For example, a layer derived by geomAndNot( contact metal1 ) would represent areas in which a contact was not covered by metal1.

Retrieved from "http://www.eda.ncsu.edu/wiki/FreePDK45:SaveDerived"
Personal tools